5 products
Aluminium Rollers
V-groove, U-groove and 1, 2 and 4 wheel sliding carriages
Explore products
Strength Behind Every Window
Precision hardware for modern fenestration
Nextech manufactures and supplies the hardware that makes aluminium and uPVC doors and windows work — sliding roller carriages, SS 304 friction stays, euro cylinders and lock bodies, handles, shoot bolts and running rail.
- Products
- 29Products
- Ranges
- 5Ranges
- Warranty
- 10 yrsWarranty
V Groove Roller
₹27
NX-1A
Single Wheel Roller (Stainless Body)
₹35
NX-1C
Four Wheel Roller (Stainless Body)
₹130
NX-1E
Cylinder — Both Side Key
₹280
NX-2B
Multipoint Lock Body 8535
₹500
NX-3B
Door Lock — Long Backplate
₹600
NX-4B
On-Off Multipoint Lock
₹315
NX-5B
Casement Single Point Lock
₹75
NX-5E
Friction Arm
₹60
NX-7A
Shoot Bolt
₹55
NX-9A
Who we are
Hardware built to a published specification
Nextech Aluminium & Hardware manufactures and supplies door and window hardware from Ahmedabad, Gujarat. Our range covers the moving and locking parts of aluminium and uPVC fenestration: sliding rollers and bearing carriages, friction stays and arms, euro cylinders and lock bodies, door lock handle sets, shoot bolts, stainless track rail and polyamide locking strip.
Every item is listed with its sizes, finish, minimum order quantity and published price — so a fabricator can specify against the profile section and cost the job from the product page rather than work it out on the bench.
- Products in the catalogue
- 29Products in the catalogueListed with sizes, materials and order quantities
- Hardware ranges
- 5Hardware rangesRollers, locks, friction stays, rails and uPVC hardware
- Warranty on the range
- 10 yrsWarranty on the rangeStated on every product page
- Highest stainless grade supplied
- SS 304Highest stainless grade suppliedFriction stays, friction arms and track rail
Product ranges
Hardware for the whole opening
Five ranges covering sliding and casement movement, locking, handles and the rail and strip that complete the installation.
11 products
Locks & Cylinders
Cylinders, lock bodies, door locks and multipoint locking
Explore products
Not listed?
Tell us what you fabricate
Send us the profile system, sash weights and quantities. Our team will confirm what we can supply against your specification.
Featured
Specified most often
The products fabricators come back for, across sliding, casement and door hardware.
NX-1ARollers
V Groove Roller
Single wheel sliding roller with a V-profile wheel for aluminium sashes.
From ₹27 per piece
NX-1BRollers
U Groove Roller
Single wheel sliding roller with a U-profile wheel for flat-top track.
From ₹27 per piece
NX-1DRollers
Two Wheel Roller (Stainless Body)
Two wheel carriage in a stainless body, in 15x17, 15x20 and 15x24 mm.
From ₹44 per piece
NX-1ERollers
Four Wheel Roller (Stainless Body)
Four wheel carriage in a stainless body, in 15x17, 15x20 and 15x24 mm.
From ₹130 per piece
NX-3BLocks
Multipoint Lock Body 8535
Multipoint lock body on an 8535 backset with a full-height gear strip.
From ₹500 per piece
NX-6AFriction Stays
Friction Stay
SS 304 friction stay in 2.5 mm section, from 10" to 16".
From ₹600 per piece
NX-13CuPVC Hardware
uPVC Two Wheel Roller
Two wheel roller carriage for uPVC sliding sashes.
From ₹55 per piece
NX-13DuPVC Hardware
uPVC Four Wheel Roller
Four wheel roller carriage for uPVC sliding sashes.
From ₹140 per piece
Why Nextech
Specifications you can hold us to
Every claim below is something you can check on a product page before you order.
Stainless steel throughout
Carriage bodies, cylinders, lock bodies, friction stays and track rail are specified in stainless steel rather than mild steel. Where the catalogue states SS 304, that grade is published on the product page so you can match it to the exposure.
Priced, not quoted case by case
Every item is published with its net price, its scheme price and the order quantity the scheme price applies at. You can cost a job from the product page instead of waiting on a quotation.
Sized for real sections
Roller bodies come in 15x17, 15x20 and 15x24 mm for 15 mm track. Friction stays and U-groove friction run 10 to 16 inch. Euro cylinders come in 60, 85 and 90 mm. The size you fabricate to is the size we hold.
Complete sets, not loose parts
Handle sets ship with strike plates, end caps and screws. Door handle sets ship with lock body and lock plate. The backset and cut-outs are matched at source rather than reconciled on your bench.
The whole opening covered
Rollers, bearings, stays, locks, handles, hinges, track rail and glazing strip come from one supplier, so the running surface and the carriage that runs on it are specified together.
Built for fabricator volumes
Minimum order quantities are published on every product page, from 100 pairs on friction stays to bulk metreage on rail and strip. You know what an order looks like before you ask.
Applications
Where our hardware is specified
From single dwellings to hotel facades, the selection changes with sash weight, cycle count and exposure.
ResidentialApartments, villas and independent houses. Sliding sashes on V-groove and U-groove roller carriages, casement openings on SS 304 friction stays, and push locks and casement handles in white and black to match the profile.CommercialOffices, showrooms and retail frontages, where sashes are wider and cycle counts are higher. Four wheel carriages under the panel, SS 304 rail under the running surface, and euro cylinders keyed both sides on entrance doors.HospitalityHotels and resorts, with large glazed sliding panels onto balconies and terraces. Four wheel stainless carriages carry the panel, and multipoint lock bodies hold a tall leaf evenly against its seal.
InstitutionalSchools, hospitals and public buildings, where hardware is handled constantly and has to keep working. Euro profile lock bodies in four backsets, single point casement locks, and stainless steel through the moving parts.
ArchitecturalSpecified facades and bespoke glazing, where hardware has to disappear into the detail. Roller carriages concealed inside the sash rail, matched handle sets on full backplates, and polyamide thermal break through the profile.IndustrialFactory and warehouse glazing in exposed or corrosive conditions. SS 304 friction stays and SS 304 track rail are specified where a plain steel part would not hold up against the exposure.Talk to us
Looking for the right hardware solution?
Send us your sash sizes and weights, the profile system you fabricate and the quantities you need. Our team will come back with a specification and a quotation.
Resources
Download the catalogue
Sizes, load capacities, materials and minimum order quantities for the full range.
FAQ
Questions we get asked
Selection, materials and order quantities. If your question is not here, our team will answer it directly.
All questionsWhat does Nextech Aluminium & Hardware make?
Hardware for aluminium and uPVC doors and windows: V-groove, U-groove and 1, 2 and 4 wheel sliding roller carriages, euro cylinders and lock bodies, door lock handle sets, push, on-off, up-down and casement locks, SS 304 friction stays and arms, shoot bolts, stainless steel track rail, R 50 and polyamide.
Which sliding roller should I specify for my sash weight?
Choose the carriage by wheel count, not by frame size. Single wheel rollers suit light domestic sashes, the two wheel carriage spreads the load across the track for heavier panels, and the four wheel carriage is for the widest and most heavily glazed sliding doors. Send us the glazed sash weight and the track section and our team will confirm the right carriage.
What is the difference between a V-groove and a U-groove roller?
The groove profile has to match the track the sash runs on. A V-groove wheel locates on V-profile track and a U-groove wheel on U-profile track. Running the wrong profile puts the load on the wheel edge instead of the groove and wears both the wheel and the rail.
Which stainless steel grades do you use?
It depends on the product. Friction stays, friction arms, U-groove friction and track rail are SS 304. The 1, 2 and 4 wheel roller carriages, euro cylinders and lock bodies are supplied with stainless bodies. Each product page lists the finish the catalogue states for that item.
Do you have minimum order quantities?
Yes, and they differ by product. They range from 100 pairs on friction stays and 100 sets on handle sets up to 5000 metres on locking strip. The MOQ is listed in the specification table on every product page.
How do I get pricing?
Pricing is quoted against the specification and quantity, so it is not published on the site. Send an enquiry with the products, sizes and quantities you need and our team will come back to you with a quotation.
Get in touch
Let’s build better fenestration solutions
Whether you fabricate, distribute or specify, our team will work through the hardware selection with you.
Works
Block No. 4, Kahaan Estate, ICICI Bank LaneNr. Kothari Cross Road, SantejAhmedabad - 382722Gujarat, India